Interactive System Diagrams
Interactive images featuring components of Panther Industries print and apply and preprinted labeling automation systems.
Let-Off Supply Hub
Holds up to 14" OD roll and dispenses label materials.
Tamp Head
Platform used to position and hold the presented label prior to application.
Waste Take-Up
Collects the waste liner after labels are printed. This component DOES NOT pull the label material through the print engine.
Print Engine
Pulls the label material into itself, prints on the provided labels, dispenses the printed label onto the tamp head, and guides waste liner to the Waste Take-Up.
Operator Display (HMI)
Main touch screen interface used by operators for maintenance and verifying or adjusting operation of the Predator portion of the labeling system.
Applicator Rack (Inside)
Component of the system used in conjunction with the applicator motor to apply labels.
Low Label Sensor
Used to detect when unused labels have become low on the roll.
Brake Arm
Works in conjunction with the Let-Off Supply Hub to control the supply of labels to the print engine.
Main Plate
Base component of the Predator that all assemblies are mounted to, creating the overall print and apply system.
Fan Shroud
Creates a vacuum to hold the printed label on the tamp head, before they are applied.
Applicator Shroud
Cover (housing) for the applicator rack.
Idle Roller
Used in conjunction with the Brake Arm and Let-Off Supply Hub to route labels into the print engine.
Idle Roller
Used in conjunction with the Brake Arm and Let-Off Supply Hub to route labels into the print engine.
Print Engine Display
Used to review and/or change settings within the print engine.
Front View
Cradle Arm
Used in the cradle assembly as a mounting support for the Predator system.
Applicator Handle Clamp
Controls the vertical adjustment of the applicator assembly.
Control Box
Houses the electrical components of the Predator system.
Fuse Drawer
Installed in the Power Switch and used to hold the main AC power fuse.
Power Switch
Controls the Main AC power and allows the system to be turned on and off.
Print Engine
Pulls the label material into itself, prints on the provided labels, dispenses the printed label onto the tamp head, and guides waste liner to the Waste Take-Up.
Take-Up Motor
Drives the Waste Take-Up to collect the waste liner from the Print Engine.
Main Plate
Base component of the Predator that all assemblies are mounted to, creating the overall print and apply system.
Applicator Motor
Used in conjunction with the applicator rack to electrically drive the rack and tamp head combination to apply a printed label to an item.
Home Sensor
Indicates that the tamp head is in the “home” position and potentially ready to receive a printed label.
Rear View
Operator Display (HMI)
Main touch screen interface used by operators for maintenance and verifying or adjusting operation of the Phantom portion of the labeling system.
Let-Off Supply Hub
Holds up to 14" OD roll and dispenses label materials.
Brake Arm
Works in conjunction with the Let-Off Supply Hub to control the supply of labels to the print engine.
Waste Take-Up
Collects the waste liner after labels are printed. This component DOES NOT pull the label material through the print engine.
Print Engine
Pulls the label material into itself, prints on the provided labels, dispenses the printed label onto the tamp head, and guides waste liner to the Waste Take-Up.
Tamp Head
Platform used to position and hold the presented label prior to application.
Air Assist Tube
As the label is being printed, it provides pneumatic assistance to correctly present the label to the tamp head.
Applicator Cylinder
Drives the tamp head pneumatically to apply a printed label to the item.
Home Sensor
Indicates that the tamp head is in the “home” position and potentially ready to receive a printed label.
Applicator Adjust (V)
Allows vertical adjustment of the applicator cylinder/tamp head to position the tamp head correctly in relation to the Print Engine’s peel bar.
Applicator Adjust (H)
Allows horizontal adjustment of the applicator cylinder/tamp head for alignment with labels as they are printed.
Low Label Sensor
Used to detect when unused labels have become low on the roll.
Main Plate
Base component of the Phantom that all assemblies are mounted to, creating the overall print and apply system.
Idle Roller
Used in conjunction with the Brake Arm and Let-Off Supply Hub to route labels into the print engine.
Idle Roller
Used in conjunction with the Brake Arm and Let-Off Supply Hub to route labels into the print engine.
Print Engine Display
Used to review and/or change settings within the print engine.
Front View
Main Plate
Base component of the Predator that all assemblies are mounted to, creating the overall print and apply system.
Control Box
Houses the electrical components of the Phantom system.
Power Switch
Controls the Main AC power and allows the system to be turned on and off.
Fuse Drawer
Installed in the Power Switch and used to hold the main AC power fuse.
Print Engine
Pulls the label material into itself, prints on the provided labels, dispenses the printed label onto the tamp head, and guides waste liner to the Waste Take-Up.
Cradle Arm
Used in the cradle assembly as a mounting support for the Phantom system.
Filter/Regulator
Controls the pneumatic pressure for the system.
Vacuum Generator
Generates a vacuum that holds a printed label on the tamp head before the label is applied to the product.
Solenoid Valves
Pneumatic controls for the Phantom. When activated, they operate the Applicator, Vacuum Generator, or Air Assist Tube.
Take-Up Motor
Drives the Waste Take-Up to collect the waste liner from the Print Engine.
Rear View
Operator Display (HMI)
Main touch screen interface used by operators for maintenance and verifying or adjusting operation of the P5c portion of the labeling system.
Main Plate
Base component of the P5c that all assemblies are mounted to, creating the overall print and apply system.
Waste Take-Up
Collects the waste liner after labels are printed. This component DOES NOT pull the label material through the print engine.
Let-Off Supply Hub
Holds up to 8" OD roll and dispenses label materials.
Print Engine
Pulls the label material into itself, prints on the provided labels, dispenses the printed label onto the tamp head, and guides waste liner to the Waste Take-Up.
Tamp Head
Platform used to position and hold the presented label prior to application.
Applicator Cylinder
Drives the tamp head pneumatically to apply a printed label to the item.
Home Sensor
Indicates that the tamp head is in the “home” position and potentially ready to receive a printed label.
Applicator Adjust (V)
Allows vertical adjustment of the applicator cylinder/tamp head to position the tamp head correctly in relation to the Print Engine’s peel bar.
Applicator Adjust (H)
Allows horizontal adjustment of the applicator cylinder/tamp head for alignment with labels as they are printed.
Print Engine Display
Used to review and/or change settings within the print engine.
Front View
Print Engine
Pulls the label material into itself, prints on the provided labels, dispenses the printed label onto the tamp head, and guides waste liner to the Waste Take-Up.
Cradle Arm
Used in the cradle assembly as a mounting support for the P5c system.
Vacuum Generator
Generates a vacuum that holds a printed label on the tamp head before the label is applied to the product.
Solenoid Valves
Pneumatic controls for the Phantom. When activated, they operate the Applicator, Vacuum Generator, or Air Assist Tube.
Filter/Regulator
Controls the pneumatic pressure for the system.
Power Switch (Side)
Controls the Main AC power and allows the system to be turned on and off.
Fuse Drawer (Side)
Installed in the Power Switch and used to hold the main AC power fuse.
Main Plate
Base component of the P5c that all assemblies are mounted to, creating the overall print and apply system.
Control Box
Houses the electrical components of the Phantom system.
Applicator Adjust (V)
Allows vertical adjustment of the applicator cylinder/tamp head to position the tamp head correctly in relation to the Print Engine’s peel bar.
Rear View
Let-Off Supply Hub
Holds up to 14" OD roll and dispenses label materials.
Tower Lamp
Visual indication of the P8e's status. Also equipped with an audible alarm for when the system is in an error condition.
Main Plate
Base component of the P8 that all assemblies are mounted to, creating the overall print and apply system.
Waste Take-Up
Collects the waste liner after labels are printed. This component DOES NOT pull the label material through the print engine.
Print Engine
Pulls the label material into itself, prints on the provided labels, dispenses the printed label onto the tamp head, and guides waste liner to the Waste Take-Up.
Brake Arm
Works in conjunction with the Let-Off Supply Hub to control the supply of labels to the print engine.
Operator Display (HMI)
Main touch screen interface used by operators for maintenance and verifying or adjusting operation of the P8 portion of the labeling system.
Home Sensor
Indicates that the tamp head is in the “home” position and potentially ready to receive a printed label.
Applicator Cylinder
Drives the tamp head pneumatically to apply a printed label to the item.
Tamp Head
Platform used to position and hold the presented label prior to application.
Air Assist Tube
As the label is being printed, it provides pneumatic assistance to correctly present the label to the tamp head.
Applicator Adjust (V)
Allows vertical adjustment of the applicator cylinder/tamp head to position the tamp head correctly in relation to the Print Engine’s peel bar.
Applicator Adjust (H)
Allows horizontal adjustment of the applicator cylinder/tamp head for alignment with labels as they are printed.
Low Label Sensor
Used to detect when unused labels have become low on the roll.
Idle Roller
Used in conjunction with the Brake Arm and Let-Off Supply Hub to route labels into the print engine.
Idle Roller
Used in conjunction with the Brake Arm and Let-Off Supply Hub to route labels into the print engine.
Print Engine Display
Used to review and/or change settings within the print engine.
Front View
Let-Off Supply Hub
Holds up to 14" OD roll and dispenses label materials.
Waste Take-Up
Collects the waste liner after labels are printed. This component DOES NOT pull the label material through the print engine.
Print Engine
Pulls the label material into itself, prints on the provided labels, dispenses the printed label onto the tamp head, and guides waste liner to the Waste Take-Up.
Operator Display (HMI)
Main touch screen interface used by operators for maintenance and verifying or adjusting operation of the P8e portion of the labeling system.
Fan Shroud
Creates a vacuum to hold the printed label on the tamp head, before they are applied.
Tamp Head
Platform used to position and hold the presented label prior to application.
Applicator Shroud
Cover (housing) for the applicator rack.
Applicator Rack (Inside)
Component of the system used in conjunction with the applicator motor to apply labels.
Main Plate
Base component of the P8e that all assemblies are mounted to, creating the overall print and apply system.
Low Label Sensor
Used to detect when unused labels have become low on the roll.
Idle Roller
Used in conjunction with the Brake Arm and Let-Off Supply Hub to route labels into the print engine.
Idle Roller
Used in conjunction with the Brake Arm and Let-Off Supply Hub to route labels into the print engine.
Brake Arm
Works in conjunction with the Let-Off Supply Hub to control the supply of labels to the print engine.
Print Engine Display
Used to review and/or change settings within the print engine.
